0 Items $0
Home > Products > Hull & Deck Fittings > Hull & Deck Fittings

Ballast retaining nut seat

Part Number INS-SEAT
Ballast retaining nut seat
Email a friend Email a friend
Questions about this item? Ask here. Questions about this item? Ask here. (See 1 Questions)
Price
Your Price:  
$8.49
Availability:
In Stock
Quantity
Add to Wish List
Description
Ballast retaining nut seat, to match INS-030, brass to resist wear. This is a brass seat or housing for the ballast retaining nut that we use to attach removable ballasts to fins.

Often the counterbored hole in the ballast becomes misshaped with use and the nut does not seat properly thus preventing the ballast from being properly tightened onto the fin. Setting this brass seat into the ballast prevents that. It will be used as a standard part when we prepare a fin for a removable ballast and can be fitted to existing ballasts if they need to be made good

Questions and Answers
Q: Do you have one of these big enough for an IOM bulb? I purchased this one and it seams way too small.
Asked by: Al Ross - 11/11/2014
A: These are used by SAILSetc in their IOM's, M's,10R's & A's. They do not offer any others.
Was this answer helpful?    0 of 1 Customer(s) found this Answer helpful.
Answer provided by:  Administrator (11/11/2014)
Related Items
Ruder Stock and Tube
Ruder Stock and Tube
Your Price: $10.08
Cleats - laser cut, Stainless Steel
Cleats - laser cut, Stainless Steel
Your Price: $6.50
Tangs - laser cut, Stainless Steel
Tangs - laser cut, Stainless Steel
Your Price: $6.50
Sheet Fairlead
Sheet Fairlead
Your Price: $5.95
Screw Top Pot
Screw Top Pot
Your Price: $3.15
Sheet Lead, flush
Sheet Lead, flush
Your Price: $18.50
Mainsheet Post - by SAILSetc -
Mainsheet Post - by SAILSetc -
Your Price: $16.59
Tapered Drain Hole Plug - by SAILSetc -
Tapered Drain Hole Plug - by SAILSetc -
Your Price: $0.85
Track slide for mast heel fitting  - by SAILSetc -
Track slide for mast heel fitting - by SAILSetc -
Your Price: $1.98