0 Items $0
Home > Products > Hull & Deck Fittings > Hull & Deck Fittings

Tiller arm retainer with cone

Part Number 069-RET-CONE
Tiller arm retainer with cone
 
Email a friend Email a friend
Questions about this item? Be the first to ask here. Questions about this item? Be the first to ask here.
Price
Your Price:  
$6.50
Availability:
In Stock
Quantity
Add to Wish List
Description
  • Tiller arm retainer with cone
  • This item retains the tiller arm(147S-4 or 147S-5) in place on top of the rudder trunking (69-040) when the tiller arm screw is slackened to remove the rudder from the boat.
  • Supplied with a suitable screw, to replace the original and nut.
  • The special cone shaped piece fits onto the tiller arm lock screw and helps to guide the allen key into place when tightening or slackening the screw. Useful when access and visibility inside the hull is limited.
The credit for the design of threatener part goes to Henning Faas of Germany. SAILSetc is grateful for his permission to reproduce it. The cone is a SAILSetc development.

Related Items
Track slide for mast heel fitting  - by SAILSetc -
Track slide for mast heel fitting - by SAILSetc -
Your Price: $1.98
Eyebolt, Deck Mount, M3.5 x 25mm, Nickel plated brass - by SAILSetc -
Eyebolt, Deck Mount, M3.5 x 25mm, Nickel plated brass - by SAILSetc -
Your Price: $2.05
Mainsheet Post - by SAILSetc -
Mainsheet Post - by SAILSetc -
Your Price: $12.00
Mainsheet Post - by SAILSetc -
Mainsheet Post - by SAILSetc -
Your Price: $16.75
Screw Top Pot
Screw Top Pot
Your Price: $3.15
Rudder Shaft, 4mm x 150mm Stainless Steel, Brass tube  50mm for IOM
Rudder Shaft, 4mm x 150mm Stainless Steel, Brass tube 50mm for IOM
Your Price: $4.99
Tangs - laser cut, Stainless Steel
Tangs - laser cut, Stainless Steel
Your Price: $6.50
Rudder Stock and Tube - 4 mm diameter stock
Rudder Stock and Tube - 4 mm diameter stock
Your Price: $10.08
Mast Step - 3d printed ABS
Mast Step - 3d printed ABS
Your Price: $3.50
Browse Similar Items